ipsec
CHANGELOG for IPv6 Ready Logo Phase-2 IPsec Conformance Test Package
2007/10/15 Release 1.1.2
Official release
2007/10/11 Yukiyo Akisada
Remove tests:
ipsec.p2/INDEX_P2_HOST, INDEX_P2_HOST_TCP, INDEX_P2_HOST_UDP,
INDEX_P2_SGW, INDEX_P2_SGW_UDP,
p2_HTR_E_ICV_ESN.seq, p2_SGW_E_ICV_ESN.seq
- remove ESN test cases
because ESN configuration always requires to use IKEv2
2007/08/31 Release 1.1.1
Official release
2007/08/31 Yukiyo Akisada
Bug fix:
ipsec.p2/p2_HTR_E_SelectSPD_ICMP_Type.seq
p2_SGW_E_SelectSPD_ICMP_Type.seq
- change to require SAD/SPD mapping
as following Implementation Guidance
at section 4.4.2. in RFC 4301.
2007/04/27 Release 1.1.0
Official release
2007/03/16 Release 1.1.0b1
Beta release for "dry run"
2007/03/14 Yukiyo Akisada
New tests:
- Select SPD (ICMP Type)
- Receipt of No Next Header
- TFC Padding
- ICV calculation (ESN)
- Encryption Algorithm: AES-CTR
Remove tests:
- Authentication Algorithm: HMAC-MD5
- Encryption Algorithm: DES-CBC
2005/12/26 Release 1.0.7
Bugfix release
- test tool bugs are fixed.
2005/12/22 Nobumichi Ozoe
ipsec.p2/INDEX_P2_SGW, INDEX_P2_SGW_UDP
- modified test number corresponding to test specification.
2005/12/22 Mitsuru Chinen, Kazunori Miyazawa
ipsec.p2/p2_SGW_E_PacketTooBigForwarding.seq
- modified expected MTU value of ICMP error message
2005/11/17 Release 1.0.6
Bugfix release
- test tool bugs are fixed.
2005/10/26 Mitsuru Chinen
ipsec.p2/p2_HTR_Reset.seq
- use not system() but copy()
2005/10/6 Nobumichi Ozoe
ipsec.p2/p2_HTR_E_Bypass.seq, p2_HTR_E_Discard.seq,
p2_HTR_E_TCP_Bypass.seq, p2_HTR_E_TCP_Discard.seq
p2_SGW_E_Bypass.seq, p2_SGW_E_Discard.seq
- modified SPD keyward from "::" to "any"
2005/10/2 Nobumichi Ozoe
ipsec.p2/IPSEC.pm
- modified function of reseting NUT's MTU
- modified function of receiving NS for SGW test case
2005/9/27 Release 1.0.5
Official release
- The tool is updated according to the change of the test specification.
2005/9/20 Nobumichi Ozoe
ipsec.p2/p2_SGW_E_PacketTooBigTransmission.seq
- modified the maximum MTU value of ICMP error message
2005/7/22 Release 1.0.4
Official release
- test tool supports AES-XCBC-MAC
2005/7/04 Release 1.0.3
Bugfix release
- test tool bugs are fixed.
2005/7/04 Nobumichi Ozoe
ipsec.p2/IPSEC.pm
- modified return code check
- added one more Router Solicitation (RS) packet as expected frame
in waiting RS function.
- default reboot and address assign time was shortened.
ipsec.p2/p2_HTR_common.def p2_SGW_common.def
- added packet define of Router Solicitation
ipsec.p2/p2_HTR_E_PacketTooBigReception.seq
- modified return code check
2005/6/22 Release 1.0.2
Official release
2005/6/22 Nobumichi Ozoe
ipsec.p2/INDEX_P2_SGW, INDEX_P2_SGW_UDP
- deleted p2_SGW_E_PacketTooBigForwardingKnown.seq from test item
- its test name is Packet Too Big Forwarding Known Original Host.
ipsec.p2/IPSEC.pm, p2_HTR_Reset.seq
- When MANUAL_ADDR_CONF=yes is configured and NUT is rebooted,
now it executes the address assign and default route configuration.
- If TN received NS probing neighbor from NUT, TN sends NA to NUT.
2005/5/12 Release 1.0.1
Bugfix release
- test tool bugs are fixed.
2005/5/12 Nobumichi Ozoe
ipsec.p2/IPSEC.pm
- define default vaule of wait time after rebooting
- modify the function of address assignment
ipsec.p2/p2_HTR_Reset.seq
ipsec.p2/p2_SGW_Reset.seq
- theses test are ignored,
because it are only used for initialization of NUT.
ipsec.p2/p2_HTR_E_TCP_invalidICV.seq
- modify the port of NUT is changeable
2005/5/09 Nobumichi Ozoe
ipsec.p2/INSTALL.ct
- more detailed explanation
ipsec.p2/INDEX_P2_HOST, INDEX_P2_HOST_TCP,
INDEX_P2_HOST_UDP, INDEX_P2_SGW, INDEX_P2_SGW_UDP
- using keyword 'null' as ESP NULL encryption algorithm
ipsec.p2/Makefile, Makefile.test
- using keyword 'ipv6ready_p2_end_node' to start test for IPsec End-Node
ipsec.p2/p2_HTR_E_Common.seq, p2_SGW_E_Common.seq, keys.def, keys.pl
- using keyword 'null' as ESP NULL encryption algorithm
- correct some displayed messsage
ipsec.p2/p2_HTR_E_PacketTooBigReception.seq
p2_SGW_E_PacketTooBigForwarding.seq
p2_SGW_E_PacketTooBigForwardingKnown.seq
p2_SGW_E_PacketTooBigTransmission.seq
p2_ipsec_config IPSEC.pm
- modify the method to reset MTU of NUT
2005/01/11 Yukiyo Akisada
Makefile.inc
- define V6EVALROOT variable
2005/4/29 Release 1.0
1st official release
[end of CHANGELOG]
разделы
купить k800i
инвертор
время архангельск
поливомоечная машина
кс-4361
информационный валаам
система дымоудаления
услуга кострома
предохранитель пкт
организовать рассылка
селин дион билет
спецобувь заказ
пионовая беседка
биоэпиляция
рукавица
профессиональный видеосъемка
нард online
мва
вино роза
скс
охота лис
паркетный лак
два цвет
ваттметр
5004.10 (крышка)
вихревой теплогенераторы
кислотостойкий краска
газовый заправка
утюг
фарфор portofino
пластиковый пакет
купить электрооткрывалку
кайт
soflens comfort
профессиональный психолог
учиться танго
инвертор
калибровка цвет
съемный зубной протез
крановый тележка
сборный доставка
миканитовые втулка
nokia 6021 купить
изолента хб
классический аэробика
швейцария культура
кулер 754
короткий нард скачать бесплатный
nokia 6021 купить
герб рф
универсам красный площадь
электро лаборатория
dunlup 205 55 r16
холодильный централь
ipsec